| Logo Printing: | Without Logo Printing |
|---|---|
| Customized: | Customized |
| Type: | Cutting Tool |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Brazed tips up to ISO
| Type | Dimension (mm) | ||||
| L | t | S | r | a° | |
| A5 | 5 | 3 | 2 | 2 | - |
| A6 | 6 | 4 | 2.5 | 2.5 | - |
| A8 | 8 | 5 | 3 | 3 | - |
| A10 | 10 | 6 | 4 | 4 | 18 |
| A12 | 12 | 8 | 5 | 5 | 18 |
| A16 | 16 | 10 | 6 | 6 | 18 |
| A20 | 20 | 12 | 7 | 7 | 18 |
| A25 | 25 | 14 | 8 | 8 | 18 |
| A32 | 32 | 18 | 10 | 10 | 18 |
| A40 | 40 | 22 | 12 | 12 | 18 |
| A50 | 50 | 25 | 14 | 14 | 18 |
| Type | Dimension (mm) | ||||
| L | t | S | r | a° | |
| B5 | 5 | 3 | 2 | 2 | - |
| B6 | 6 | 4 | 2.5 | 2.5 | - |
| B8 | 8 | 5 | 3 | 3 | - |
| B10 | 10 | 6 | 4 | 4 | 18 |
| B12 | 12 | 8 | 5 | 5 | 18 |
| B16 | 16 | 10 | 6 | 6 | 18 |
| B20 | 20 | 12 | 7 | 7 | 18 |
| B25 | 25 | 14 | 8 | 8 | 18 |
| B32 | 32 | 18 | 10 | 10 | 18 |
| B40 | 40 | 22 | 12 | 12 | 18 |
| B50 | 50 | 25 | 14 | 14 | 18 |
| Type | Dimension (mm) | |||
| L | t | S | a° | |
| C5 | 5 | 3 | 2 | - |
| C6 | 6 | 4 | 2.5 | - |
| C8 | 8 | 5 | 3 | - |
| C10 | 10 | 6 | 4 | 18 |
| C12 | 12 | 8 | 5 | 18 |
| C16 | 16 | 10 | 6 | 18 |
| C20 | 20 | 12 | 7 | 18 |
| C25 | 25 | 14 | 8 | 18 |
| C32 | 32 | 18 | 10 | 18 |
| C40 | 40 | 22 | 12 | 18 |
| C50 | 50 | 25 | 14 | 18 |
| Type | Dimension (mm) | ||
| L | t | S | |
| D3 | 3.5 | 8 | 3 |
| D4 | 4.5 | 10 | 4 |
| D5 | 5.5 | 12 | 5 |
| D6 | 6.5 | 14 | 6 |
| D8 | 8.5 | 16 | 8 |
| D10 | 10.5 | 18 | 10 |
| D12 | 12.5 | 20 | 12 |
| Type | Dimension (mm) | |||
| L | t | S | a° | |
| E4 | 4 | 10 | 2.5 | - |
| E5 | 5 | 12 | 3 | - |
| E6 | 6 | 14 | 3.5 | 9 |
| E8 | 8 | 16 | 4 | 9 |
| E10 | 10 | 18 | 5 | 9 |
| E12 | 12 | 20 | 6 | 9 |
| E16 | 16 | 22 | 7 | 9 |
| E20 | 20 | 25 | 8 | 9 |
| E25 | 25 | 28 | 9 | 9 |
| E32 | 32 | 32 | 10 | 9 |
Physical and mechanical properties of grades
| ISO Code | Grade | Physical and mechanical properties | Application | ||
| Density g/cm³ |
Hardness HRA |
TRS Mpa |
|||
| P10 | YT05 | 12.6 | 92.5 | 1260 | It is suitable for finishing steel and casting steel machining, high cutting speed, low feed rate, and low depth are recommended. |
| YT15 | 11.3 | 91 | 1300 | It is suitable for the semi-finishing of steel and casting steel machining, high cutting speed and medium feed rate are recommended. |
|
| P20 | YC201 | 11.79 | 91.8 | 1400 | It is suitable for semi-finishing and light roughing machining of steel, casting steel, and stainless steel. It is a suitable grade for a wide application. |
| YT14 | 11.4 | 90.5 | 1400 | It is suitable for the semi-finishing of steel and casting steel. | |
| P30 | YT5 | 12.8 | 89.5 | 1570 | Suitable for the heavy-duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions |
| P40 | YC40 | 13.15 | 89.5 | 1650 | It is suitable for the heavy-duty turning of steel and also for semi-finishing and light roughing of stainless steel and alloy steel. |
| YC45 | 12.75 | 90 | 2250 | Suitable for the heavy-duty turning of steel and cast steel with a big feed rate and also for face milling. |
|
| K05 | YG3X | 15.1 | 91.5 | 1300 | It is suitable for finishing casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. |
| YG3 | 15 | 90.5 | 1300 | It is suitable for semi-finishing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. |
|
| K10 | YM201 | 13.9 | 93.0 | 1600 | It is suitable for semi-finishing of Fe, Ni high-temperature alloy, cold hard cast irons, stainless steel with good heat resistance and nonferrous metal. It is a wide application. |
| YG6A | 14.92 | 91 | 1510 | It is suitable for semi-finishing and light roughing of casting iron, nonferrous metal, heat-resistance alloy, Ti alloy. |
|
| YG6X | 14.8 | 91 | 1560 | It is suitable for semi-finishing to light roughing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. |
|
| K15 | YD15 | 14.94 | 91 | 1650 | It is suitable for semi-finishing and light roughing of casting iron, nonferrous metal, heat-resistance alloy, Ti alloy. |
| K20 | YD201 | 14.89 | 91.0 | 1800 | It is suitable for roughing to finishing machining of heat-resistance alloy, Ti alloy, casting iron, and aluminum alloy. |
| YG6 | 14.9 | 89.5 | 1670 | It is suitable for light roughing and semi-finishing of casting iron, nonferrous metal, heat-resistance alloy, and Ti alloy. |
|
| YG8N | 14.6 | 89.5 | 1840 | It is suitable for semi-finishing and roughing of casting iron, nonferrous metal, heat - resistance alloy and Ti alloy at continuous and intermittent machining conditions. |
|
| YG8 | 14.6 | 89 | 1840 | It is suitable for semi-finishing and roughing of casting iron, nonferrous metal, heat- resistance alloy and Ti alloy at continuous and intermittent machining conditions. |
|
| K30 | YL10.2 | 14.5 | 91 | 2000 | It is suitable for semi-finishing of casting iron, nonferrous metal, stainless steel, heat-resistance alloy, and Ti alloy. |
1. Who are we?
Zhuzhou Rivictory New Material Co., Ltd. is located in Zhuzhou, Hunan, which is China's industrial base. The company's main products are tungsten carbide blanks, milling cutters, carbide rods, HSS drill bits, HSS bar, carbide burrs, CNC inserts, and epoxy resign insulators, all of which have passed ISO quality certification. At the same time, the company has its own research and development team, which can customize products according to customer needs.
The company is committed to providing customers with the most suitable products and the best quality services and strives to promote our products to all parts of the world.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
Tungsten carbide blanks, carbide rods, carbide rotary burrs, milling cutters, HSS drill bits, HSS bars, CNC inserts, and epoxy resign insulators.
4. Why should you buy from us not from other suppliers?
Our company is located in Zhuzhou city, the capital of non-ferrous metals and high-speed railway. Has a complete industrial chain, design, and research team. Our high-quality products and services are welcomed all over the world.
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF, EXW, DDP, DDU, Express Delivery;
Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY;
Accepted Payment Type: T/T, Money Gram, Credit Card, PayPal, Western Union, Cash, Escrow.
Need more information about all types of brazed tips, please send us an inquiry.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}